Samurai 5TBBlue0050 5-Inch Continuous Rim Diamond Saw Blade for Cutting Granite

Update October 2020:I’ve used this blade for a few projects and I just love it. I have used it to cut/shape granite (window sill for shower) as well as the tile mentioned below and it performed great.Today I had to make a recess for a wall light in a raised flower bed made from concrete wall blocks.This blade was used to cut the channel for the wire as well as mark where I was going to remove material to recess the wall lights (used a different angle grinder but for that part).Cutting the brick was like cutting wood - it just powered through it. I don’t use this blade too often but it still cuts like the first time.Great blade!I bought this blade for my uncommonly sized 5" angle grinder to cut porcelain tile. My tile saw's support arm would get in the way of cutting a 24" tile in half so I needed something to finish the cut.It worked extremely well for that purpose although getting the line perfectly strait and thin as the blade was challenging likely due to my lack of experience. Not much of a problem as I was able to clean up the cut on the tile saw.I also used this to cut the hole for the toilet flange which fell on three tiles and had to make two arcs and a semi circle. Originally I cut out slots with the tile saw then cleaned up with this blade on my angle grinder but I found it easier to just use this blade on the grinder.It cut (really chipped) away very easily and allowed me to get a smooth edge.It did not seem to show any wear but time will tell. I am very happy with the purchase

enough said. work great but after buying several different offset/hubless/flush-cut diamond blades, be aware that the bold/screw patterns are all over the place. Don't expect these to fit some other band of hub. The disc itself works great, used it to undercut 15 commercial office steel door frames for a polished concrete. The mounting holes are countersunk so that every other hole is useable (i.e., you can only use two screws at a time, flip it over and use the opposite two holes). Screws worked loose over time with mine, no big deal. All in all, did the job and pleased for the cost.

Do not buy if you are planning on using with Flex wet saw (or others requiring 20 mm mounting hole. I added it on to a new Flex wet saw when buying on Amazon since it was shown as "frequently purchased together". It has a 7/8 inch hole with a brass washer inset. With the washer out, it is 7/8 inch and with the washer in, it is 5/8 inch. In either case, either TOO BIG or TOO SMALL to correctly fit the hub of the saw.

Used this on one job so far. Cut about 4’ of 1 1/4” granite. The blade had little deflection and showed only lite signs of ware running at around 11,000 rpm dry. Very happy so far

Cuts granite like butter

Great saw blade. Used it with the wet circular saw that I purchased. It cut so fast that I had to keep reminding myself to cut slowly for a nice smooth cut. Used it for about a dozen cuts on old used granite counter tops that I had purchased for a song. Don't know how long the blade will last but so far so good.

Buen presio y buena calidad

For the price tag I had my doubts but I was very surprised. It will last but must increase your water pressure. Thanks