PIXMA TR8620a - All-in-One Printer Home Office|Copier|Scanner|Fax|Auto Document Feeder | Photo, Document | Airprint (R), Android, Black, Works with Alexa

This was the easiest printer to set up. The manual was a series of pictures and words on my laptop. I follwed them and it was done. It connected automatically to my WiFi. The printing I've seen so far is extraordinary. The only downside is that the paper tray is a bit flimsy (in my opinion). It doesn't hold that much paper and it slides out to fill and adjust. The tray could have been made much better. But, I think it is a great printer for my home office with a very affordable price. I had an Epson InkTank ET4850 before this and loved it. But, the Ink Tanks tend to have the ink flow tubes clog up. Three years and the blue clogged. I had to toss it. Nothing could fix it. Back in 2020 I had a Canon Pixma and loved it. And now I have another one! Oh yes..and the screen on the front is large and adjustable. Canon got it right!

ETA: the printer has been working well. Recently, I had an unusual job requiring the printing of hundreds of pages. It worked flawlessly. Also, it is very easy to refill the ink, which Aoyama is recommended. Do not buy Canon cartridges, a waste of money. Just a few drops of ink will make the cartridges like new. Strongly recommend this printer. Previous review: The only requirement for a printer is just to work - to do its job when needed. This one has been tested for several weeks, not 20 years like one of my previous printers, thus, it is too early to rate. Nevertheless, I hesitated quite a bit because of negative reviews before buying; and this review with "nominal" 5-star is just to allay the fear of someone who might hesitate like me: 1- Setting up isn't that smooth, but it is hard to blame Canon, because the printer has many features, functions, so, smart things are usually a bit complicated. One has to be patient to go through and set it up correctly. Once it is done, with all the Canon software (just basic, not fancy) installed, it will do its job. 2- Printing: since it is new, hard to know when "paper/carriage jams" will occur. I threw away my 3-yr old HP printer because even though it was hardly used, the "paper/carriage jam" problem was beyond tolerable, not to mention misprinting, misaligned on non-common media such as envelopes, checks, labels, etc. Hence, those are the things I tested on this Canon, and so far, with two trays, one cassette for letter-size paper, and one rear feeder for uncommon sizes, the printer works. It works, that was all to be asked of it. How many years (or months) will it work is a different matter. Bottom line, not fancy, but it works so far because it is new. Its print quality is decent for its class of inkjet printers in a similar price range. Photo printing on Canon glossy paper is quite nice looking. I don't have a need for heavy printing, just occasional usages, less than a dozen pages at a time with regular black/color. So far, it is very nice and trouble-free. In particular, I recalled frequent problems with my previous HP inkjet printer when printing thick and odd-size envelopes. This one so far is very reliable. I only hope that it will continue working without HP's classic "paper/carriage jam" troubles. A last note: it is well-known that HP makes money by selling very expensive ink. The rate of ink usage of this printer so far is much better than that of HP. So, if one is considering a low-end full-function, all-in-one printer, I would recommend this over any equivalent HP. I will never buy a HP again.

How much do I hate this printer? Let me count the ways... I've always had a Canon Pixma printer and love them... until now. This printer is flimsy - putting paper in the tray is so inconvenient and messy - the little flap on the tray always falls off (it seems they could have connected it so you could just flip it back and put in the paper, but no, you have to remove it and then try to jimmy it back into place). On top of that, I NEED it to be able to flip back and forth between the rear tray and the cassette tray, but you have to RESET it EVERY STINKING TIME you change your print size - you have to reset the default. So, I usually end up (first) printing on the wrong size paper and (second) having to go back to YOUTUBE to look at how to change the default back - nothing easy or intuitive about this printer. And it's slow. This is Canon's FINEST PIECE OF CRAP! I am considering going to a new brand after 15 years of Canon Pixma's. I always go back to my old stand by consideration, which is seeming kind of stale or outdated by now - but if they could put a man on the moon (OVER 50 FREAKIN' YEARS AGO), why can't they make a decent, easy to use, intuitive printer? And I paid WAY MORE than this was worth!

Muy complicado empatarla con la lap top, además instrucciones nada claras