SchluterSystems KST965/1525 Kerdi Center Outlet Shower Tray 38"x60"

This was the first time I used a pre-formed shower underlayment and doubt that I will ever go back to the previous method (deck mud and membrane liners). The primary reason is time and ease of installation. If done right, using multiple layers of deck mud and membrane sealer can take a couple weeks to completely dry, which I find is most important to avoid grout cracks and broken tiles. Plus, it was always a challenge to get the slope just right to avoid pooling.All I had to do was trim the tray to fit and apply the tape to the edges and I was done! The slope was perfect and the drain fit right in (also used the Schluter assembly). I installed the heated floor wire the next day. I have built three showers with deck mud and after using this tray, I am definitely planning on using this for future projects.

Great product

The media could not be loaded. Easy to use. I used this on my semi frameless shower. Only 2 inches high. Helped me to build a very unique design for my bathroom. I DIY. FIRST TIME USING IT AND IT WORKS WELL. I did not like the drain ring as much. But i am confident it will hold. I added red gauard only at the corners and in a circle around the DRAIN ring. USE THE DRAIN RING. It is there for a reason. It's a great solution for what i wanted.

This worked great for my walk in shower. Easy to cut and fit... The most important thing is to make sure your drain hole and the hole of the pan match perfectly. If you mess up or have a gap at your edge do not worry! you can pack it in with mortar then place membrane on top of it that overlaps an inch of the shower pan, just remember your 1/4 inch per foot slope.Below are the steps I took but before that I wanted to answer some questions you may have but you cannot find answers to (yet) on the internetDo you need to use the Schluter foam for the walls or their foam barrier? No this works as a regular shower pan, I do recommend buying the same brand drain kit... Others will work but their brand is comparably priced, fits perfect, and it comes with Schluter brand membrane covers for the drain and for your faucets.For the walls and barrier: I decided to save some money and just do the walls framed with treated 2x4's cover the frame with mold proof backerboard (1/4 inch) covered them with the mesh membrane (cheaper to buy from Amazon) using liquid membrane from Home Depot to adhere the mesh membrane to the BackerboardFor the shower pan:1. I dry fit and cut the pan2. Added a layer of mortar to adhere the pan to my baseboard using the recommended trowel and pressed the pan into my baseboard3. filled in my edge gaps with mortar then added a membrane on the newly added mortar to overlap an inch over the pan. (liquid membrane as the glue then added mesh membrane on top.)4. Tiled my bedpan, when I got to the drain, used the foam template given to fit it, then packed mud under the drain and pressed it in so I had a proper fit, then tiled under it while the mortar was still setting under the drain so I could adjust the drain based off the tile.I hope this helps someone!

Han we installed 2 of these in our house, they are by far the best you can get. 1 install was new and replaced a tub , the other replaced a sub standard shower floor from a different manufacturer. The quality of these are very good and easy to install/modify to fit your needs.

I have used both KBRS and now Schulter and also built one with mortar. By far the easiest is KBRS but they are a little expensive if you have a non-standard size for the shower. The Schulter drain is huge and you have to use one designed for this shower pan. The paper that comes with the pan doesn't stick well to the elastic paint. It is just a poor design, the KBRS drain is superior to this shower pan's drain. Other than that, it was an easy install.

Worth the money!!!

This is a fine shower base. The entire schluter line seems to be very high quality and very functional. This was relatively easy to cut and fit in my shower area. I appreciate that it has the slope built in. I didn't want to guess and try to get that right with dry pack mortar. Worked well with the rest of my schluter stuff also.