YITAHOME NSF Stainless Steel Table, 30" X 24" Work Table with Wheels, 2 Shelves Metal Prep Worktable for Home Kitchen Restaurant Garage Warehouse Outdoor

The media could not be loaded. I just purchased a Harvest Right Pro Medium Freeze Dryer and was looking for a rolling table to hold it. I took the measurements off of the Harvest Right web site and found this table. I was not sure if I would have to put the pump for the freeze dryer below but it fits perfectly behind it. It is like this table was custom built for this purpose. The top is very heavy duty and the shelf is thinner. I was unsure if it was going to be solid but after assembling it all my worries were gone. It is solid as a rock. The wheels after very smooth rolling and there is no slop in the table at all. The leg sections fit inside each other. One was bent slightly but a simple set of pliers brought it back into spec. It is a very nice looking table. There is a perfect amount of size for the freeze dryer and pump on the table top and then all the supplies down on the lower shelf. I really like to have all the supplies together. I used a little Loctite on all of the bolts so they are stable for years to come. The bottom shelf is contoured to fit the legs which make it really strong. I could not be happier with this table to be the new home for my freeze dryer and all of the supplies.

Needed something to hold a commercial vacuum packer that would allow us to easily move around, this fit the bill perfectly. Sturdy, easy to move, easy to assemble, and a great price with prompt delivery even here in Alaska.

Opened the box and inside many bent pieces. The good thing is the metal is sturdy. The bad is because it is sturdy, it was very hard to bend the leg pieces back enough to get them to slide inside each other and into the table top…which was also bent on one corner. Maybe I should have returned the table but I needed it so I spent the time unbending the legs. I could not fix the top.All-in-all, a nice sturdy table with strong wheels. I like the size, the sturdiness, the price and the fast shipping.

We needed a stainless cart that could hold the weight of our Freeze Dryer. The fact that it was stainless is great for sanitary reasons and when we eventually move to a commercial kitchen.Assembly was maybe 30 minutes with one person. Thing is sturdy as rock even with our heavy Freeze Dryer on it.The casters work great for moving it around and there is no vibration sounds even with the vacuum pump running on the bottom shelf. Speaking of the bottom shelf is super handy.If I had to list a con it would be more of a knit pick and that's how hard the protective peels were to remove from the stainless tabletop and shelf.If you need something for a Harvest Right Medium small or medium that will fit the unit and the plump plus some extra space for extra oil, filter, etc this is the best price for performance I think you will get. Also just great for kitchen appliances you want to be able to wheel in and out of your kitchen with ease.

Purchase this out stainless steel table to hold our pizza oven and on. It's the perfect size and height For any addition to your outdoor cooking needs. I purchased at the beginning of the summer and have kept it out for 3 months, never covered no signs of rust or any destruction on the table it's a solid piece.

You WILL need to back this up if you plan to put anything heavy on it. As another reviewer said, the welds are skimpy and terrible. For a restaurant who might use this as a transport cart or preparation table where heavy loads won't remain on it, then it's probably safe, despite the scary welds. But if you've seen my other reviews, you probably already know that I buy cheap stuff for my radio room and audio equipment, and then beef it up. This is no exception. I put sheets of rubber on it to keep stuff from sliding around because the SS top is slippery, and as you can see from the picture with the military tube tester on it, the top delflects about a quarter inch at the center with a 45-lb load on it. What does the manufacturer claim? 100 lbs or more?That being said, adding a 1/2-in sheet of sanded plywood changes the equation entirely. In the last photo, you're looking at about 100 lbs of test equipment. The plywood is sitting atop the leg tube brackets, so it can handle the load. The large spectrum analyzer on the right side weighs close to 60 lbs as it is. But the modded table can take it because of the plywood and the superior casters that come with this. They're very heavy duty. Had they been cheap, I might have sent this back. If necessary, I can roll my test equipment out with ease. So it was worth the effort to beef this up. BTW, a single 24" x 48" sheet of finish grade 1/2" plywood can be cut to provide support for BOTH shelves. The table is 30" x a bit under 24", and the lower shelf is only 24" x 18". So, no problem!Speaking of problems, mine came with a dented leg as you can see. Good thing I keep a tailpipe expander lying around. If a buyer doesn't have one, it could be an issue.

I needed a good sturdy table to hold a laser engraver and I didn't want wood.This table fit the bill nicely and doesn't shake when the laser is moving at high speed.It was easy to assemble and would be perfect for any use around the house where stainless steel would be appropriate.

If you can, please don't buy. Lots of buyers reported legs came in dented. I have the same problem. Parking is one reason to cause this, but more blame should go to super think material. The legs are hollow and metal sheet is super thin as well as top and second shelf. Don't buy