4FT Led Wraparound Light 40W 4 Foot Led Light Fixture, 4800 Lumens, 4000K Neutral White, 48 Inch Led Shop Lights Flush Mount for Garage, 120W Fluorescent Equivalent, 4 Pack

These 4ft led light fixtures were easy to install and were extremely bright with neutral white color temperature. I replaced this 4 foot led wraparound lights with my old fluorescent lamp. They came packaged well and itself was pretty lightweight and I was able to install these by myself to keep the fixture up. They are instant on and do not flicker, much brighter than anything with a florescent light fixture.This 4’led wrap light were exactly what I expected and cost-effective, highly recommend.

This is a great light and very bright. There are 2 design issues that will make us think twice about buying them again. 1 - The lights are not wide enough. Therefore the round electrical box shows on the side of the light and need to either fill part of the electric box with spackling / drywall mud or caulk, then paint it. This could be solved if the lights were 3/4" to 1" wider. 2 - There is not a metal box inside the light to stuff the electrical wires and wire caps and prevent them from being seen. Therefore they have to be shoved into the small electric box above the light in order to prevent the wires from being seen while in the room. This also means the wires have to be cut pretty short in order to get them to fit in the electrical box.

We had 4 BIG fluorescent light with 4 bulbs each. We replaced them with these LED fixtures and our electric meter wheel slowed to a crawl. There are no bulbs to replace ever. They put out the same amount of light that our 120 watt fluorescents put out. Great price and will save us money long term.

These are much lighter in weight than the old style ballast fluorescent lamps. Light output seems the same or slightly better than the double 40w tubes that were replaced. The wires hang inside and lie on the lens so can be seen. I recommend some small white zip ties to lift them up away from the lense. There is a loop to attach the zip tie but no instruction telling you to do so. No zip ties were supplied.Screws and anchors are included to mount the light units. They weigh so little that I felt the dry wall anchors were too much and saved them for later use on another project. A great purchase. Highly recommend.

The positives are that these are good lights for the price and light up my shop really well. In a ~300 sq ft space, I put 2 over a work bench area and 6 in the rest of the space. They are nice and light which makes them easier to mount, especially working alone.Some people complained about the wires showing through the diffuser. My solution to that was to just use a wire connector and do the connection above the light and inside the work box. See photo.I agree with others about the mounting holes. I ended up having to buy these plates in order to mount to my 4" work boxes. The plates can basically only mount in 1 way in order to get the holes to line up and the light to be centered. https://www.amazon.com/gp/product/B0822H1K2YMy last complaint is that I used standard 4" work boxes, and the lights are not wide enough to cover the box. My sheet rock ceiling is pretty tight to the boxes, not a big gap, but the lights still are too narrow. See the images where the holes still show. If the lights were 3/4" or 1" wider at the mounting surface it would not be an issue. They don't even need to have more sheet metal, just bend it a bit different. I guess these lights are made for smaller boxes and that is probably why the mounting holes don't align for 4" box.Overall a good light and I am pretty happy with them for my shop. If it were a finished space in my house, the holes showing through would be a show stopper for me.

Works well and throws off tons of light

Arrived as ordered, and really shines well. Only issue I had was the center cutouts for mounting do not allow them to mount exactly straight, so I had to expand the slots a bit to allow to rotate 90 degrees.

because you’ll need them after installing these lights. We replaced two florescent light fixtures in our master bedroom closet…what a difference! I think they’re a good value at the price we paid and they were relatively easy to install. Two things to consider:-If you’re replacing “ traditional “ shop lights these are not as wide and they might not cover the holes and/or ceiling box when you install them.( ours didn’t and we had to patch several holes).-These are bright white whereas some people , including my wife, would rather have “ soft white” fixtures.