Replacement for 2005-2013 Chevrolet Corvette C6 All Models | ZR1 Extended Style Rear Trunk Lid Wing Spoiler (ABS Plastic - Hydro-Dipped Carbon Fiber)

I ordered this for a 2007 Corvette Z06. The finish is a nice matte black that is very close to matching the black plastic accents of the car. Installation was fairly easy without having to drill any holes in the bumper. I was able to use the 4 bolts from the factory centered spoiler and then use 3m molding tape to hold the sides in place. Has been on for several months and is still very tight to the body. Seems to be made from a durable plastic material and was less expensive than many alternatives.

I think this is a great product and the look is fantastic. The carbon fiber look is impressive and I've gotten many complements at shows. The quality is great and packaging was very robust so that the part couldn't be damaged during transport. Installation took awhile since I had never done this before and alot of time spent was for prep. My only complaint is that instructions could be more detailed and even better if there was a template to help guide the installation (since you have to drill holes in the rear panel).

I think it looks great on my 05 & it was fairly easy to install. I was a little worried about the finish & if it would be damaged in shipping after reading some of the negative reviews here and on some other web stores. They did a good job packaging the spoiler and the Hydro-Dipped Carbon Fiber finish looks great. Even my wife likes the new look LOL. Just take your time and check everything a few times before drilling any holes. I did not use the tape because I did not think it would stay on with the tape. I tried the tooth paste and some other things on the screws to mark where you would have to drill the hole but I was by myself and I was not happy with accuracy of the marks so I put masking tape on the area where the holes needed to go without anything on the screws and placed the spoiler on the car and pressed as hard as I could and it left the mark of the bolt heads and I was happy with this method and drilled through the marks and the holes came out just about perfect. Here are some pictures. One before & 3 after the install.

If you are not looking to spend a lot of money then this is a great product to consider. It is only plastic and is just painted. So, it can scratch easily; as I have a couple of scratches on the surface of the spoiler. There are no installation templates for the screws, so you need to do some careful planning and measuring before you go drilling holes up through the back bumper. Overall though, once it is installed, it looks awesome and really changes the overall look of the car.

This fits great and looks even better. The price is the best thing about it. Was shipped to where it would not damage on the trip over. These companies that jack up the price just because it's a Corvette are crazy because it looks to be the same molding g as this. Same with the side runner skirts . This company has dine it right. Great product great quality and a great price. I would recommend them for your Corvette aftermarket body items.

Great quality & black gloss paint matched perfect👌🏼 The included short bolts didn’t work well for me. I work recommend getting longer bolts or using a roll of gorilla glue double side tape. Quality product & great value.

I didn’t expect much at this price point and thought there was a high likelihood I would end up returning it to Amazon. Instead I was very pleasantly surprised the fit and finish well exceeded my expectations. The stock center brake light snaps snuggly into place just like it did in the stock spoiler it came out of. The glossy black paint is a perfect match for my factory glossy black 2011 Grand sport. There weren’t any installation instructions but everything is there to mount with 4 bolts and 3m tape if you don’t want to drill holes in the bumper. If you don’t mind drilling holes in the bumper there are screws included and screw bosses under the spoiler to drill into. Fair warning I did not completely finish installing spoiler in the pics attached. I couldn’t wait to try it out and I’m temporarily driving around with only the four center bolts lol the car is also dirty in the pic the paint matches better when washed

The reviews were all over the map, being a Body Guy, this was easy, i removed the old small spoiler for my wide body 2011 Grand Sport. i had to redrill 2 holes in the bumper still hidden and never seen, placed the new spoiler on a soft towel, installed (6) M6 studs in the new spoilers threaded holes, plugged the old 2 holes not needed in the bumper and placed the 2 sided tape around the spoiler, then dropped it in place and tighten the bolts, done and looks great. left it in the sun a few Hours and Pro installed, took under 1 hour.

Looks Great ! Did not want to drill into my C6, so used some better 3M tape. The thin tape the sent with the kit wil not do the job. Only problem is that it needs to be screwed down as the flex is to strong to hold it flush at the ends with the body. The ones they send with the kit ar very short and not easy to line up. Other than that it is great.

Looks great! Perfect fit, packaged well, and looks Amazing!

I had a body shop put this on and they were very impressed. Asked where I got it from incase they need to order more

So let's start with pros. Shipping time was quick to Canada Fitment appears to be fantastic good quality for the price I will be using the bolt on method but it doesn't come with 3m if you wish to go that route. Paint is super close match to the factory OEM color mines just dirty and needs a polish. Now let's get to the cons Zero instructions or template to drill into your bumper which can be a touchy subject for some. The hardware is to short I recommend getting some longer bolts so more threads engage the wing to hold it. All in all I am very satisfied with my purchase and will be updating upon completion. As well as making a template out of trace paper or something to perhaps provide on Amazon for others

packaged excellently,arriving in perfect condition.fit was good but maybe not excellent.installation was no problem using the bolt holes around the 3rd brake light and the double sided tape on the outer section it feels super secure. no need to drill extra holes.(the next owner may not really want a spoiler so it can be removed).for the price,this is probably the best spoiler out there.overall ,very happy !