MR1-B

These are amazing. I have ordered these three different times as I have replaced devices cases and such you can’t really reuse one once it’s been applied, which is fine because it has quality adhesive and that’s what you’d want when mounting your phone to something. And they include six in the pack which is great. I’ve often given extra out to friends and family didn’t know something like this was available. For the price, quality and usefulness are great highly recommend exactly as described. One thing to know is I wish I had known the size guide exist in the packaging to purchase. I guess I should pay attention but that’s amazing. I have an iPhone 15 Pro now, but it still seems to be accurate even though it has iPhone 13 printed. Highly recommend, improves Magra integrity through a case or can be added to a case that doesn’t have MagSafe built into it even putting it on the iPhone gives you a much stronger att to max accessories in which maybe highly valuable to not accidentally fall off, like the wallet, or protect your phone from potentially falling off the MagSafe mounting dropping to the ground.

The size is perfect and I like how thin it is. It is very easy to install. HOWEVER, the magnet is wayyyy too strong for my liking. My popsocket is basically stuck onto the magnet unless I pry it off with a sharp object. I want to be able to easily relocate my pop socket but this magnet is just too strong. If you're planning on removing your popsocket often, I wouldn't recommend this magnet.

Phone: Samsung Galaxy S21 Case: Spigen Tough Armor Right out of the box, I attempted to place a ring between the case's hard shell and silicone "sock" to see if the ring had enough meat for magnetic mounting. I used a pretty strong magnet and it barely had enough strength to hold the case by itself, so it wasn't even worth adding the weight of the phone to the mix. I tried a few other tests with thin pieces of cardboard and got similar results. That said, the ring will ONLY work when installed on the exterior of a case. When I eventually adhered the ring to the exterior of the case, the magnet held it with some surprisingly strong and reliable strength. It was also very thing to taking it in and out of my pocket did no pose a single issue. It wasn't until I attempted to remove the ring then re-adhere it that I ran into issues of the ring getting caught on my pocket and other simple things. But in short, the ring is a thumbs up in my book. There are 6 total rings in the packaging -- 3 silver and 3 matte black. I figure longevity isn't great with the rings hence there being so many in the kit. But so far after a week of use, I'm happy with the ring. Just remember to use alcohol (not included) to clean the exterior of the case, then after it dries fully, adhere the ring. In the event that you need to remove the ring, a simple pocket knife does wonders. Though do not plan on re-adhering the ring without fear of it being as reliable as the first adhesion.

My Samsung galaxy case is not metal, but I wanted to be able to use a really great magnet car mount that I bought. I considered using a thin steel plate inside the case, but I also wanted to still be able to use my wireless charger, and a steel plate inside the case would block the charge. These metal rings are a perfect solution. They are a little pricey at $2 each (a pack of 5 for $10), but the adhesive is very strong and I haven't had any issues with either the magnetic car mount or the wireless charger in two years of use now. BTW, this is the magnetic car mount I use it with. It's great. It grips onto an air vent slat with jaws that you tighten, and the magnetic strength is fantastic. https://www.amazon.com/Magnetic-Car-Mount-Holder-MagSafe/dp/B099ZX9912/ref=sr_1_3_pp?crid=13TURVSUGEG1B&keywords=magsafe+car+mount&qid=1690760994&s=electronics&sprefix=magsafe+%2Celectronics%2C98&sr=1-3

I've seen some reviews describe weak sticking power, not sure what that is about, probably poor manufacturer quality control, because I nearly ripped my phone case trying to remove them. Anyways in my case I was getting annoyed by the lack of the vertical magsafe bar part, making attached things rotate and get loose if they're VERY heavy. I only have one such product, a 10aH Baseus battery, but I had also always suspected that these rings increased the horrible wireless overheating I witnessed. So I just purchased the thicker ESR magnet with vertical bar, and got a duplicate case to try it on. Will update if that fixes all of my issues. I'm going to miss the thinness tho!

Installed on my Otterbox Commuter case for my iPhone 11. Installation was easy. The kit includes a template to center the ring on the phone case. I've been using this with both a Belkin MagSafe charger and a generic MagSafe dashboard mount. It works great on both. Note that the MagSafe charger works great as a Qi charger but you don't get the faster charging available on the iPhone 12 and up. That has been fine for me though. Final bonus is that the ring adds just a touch of grip to the Otterbox Commuter case which can be a little slippery on its own.

⭐☆☆☆☆ Not Reliable – Poor Adhesion and Constant Dropping I really wanted these circular sticky magnets to work, but they’ve been a huge letdown. After just a couple of weeks, I’m already replacing them because they won’t stay stuck to my phone. Even worse, I use an attached ring that connects to the magnet, and I’m constantly dropping my phone because the glue loses its grip and it falls off the ring attachment. It might hold for a day at most, then starts peeling off. These are definitely not made for daily use or any real support. Save your money and look for something stronger and more secure.

Ive watched countless TikToks and YouTube videos to get the perfect kindle set up. Here it is ladies and gents (all those in-between). These are so super strong. In the video I posted you can tell because I have to push my other hand (phone I was recording with) down on the cover to take the Popsocket off. The ring adhesive is super strong. The Amazon cover it sits on is a soft fine felt and it has never lifted off dispite how much I have to yank to get the Popsocket off. The ring is also very thin and it doesn't scratch up my Kindle Fire HD screen. Highly recommend! You can put them anywhere and all over. Even if you have the clear back cases to display stickers and such. I should get paid for promoting 3 products here! Lmao just saying Amazon...

Los plateados no se ven tan bien sin embargo el pegamento y la función se cumplen

Quedé sorprendido con lo buenos que son los estos anillos queda todo muy bien.

Muy bueno, sirvio para un cargador magsafe para coche. No se cae el teléfono.

Excelente producto funciona correctamente.