Tangkula Bathroom Vanity Lamp Brushed Nickel Wall Mounted Vanity Lighting Fixture with White Glass Shade Wall Sconce Pendant Lamp (Nickel, 3)

Easy to install and gives a nice clean line look to the bath.

This Vanity Lamp (not just the "shades" but as pictured) is larger and heavier than I expected. The packaging adequately protects the beautifully swirl-finished glass shades and two included LED bulbs. The metallic lamp body is well finished and robustly constructed. Installation took just a few minutes, hung the lamp upside-down, opposite what is shown in the product picture. My wife loves it, and provides excellent illumination in front of a mirror.What is important here is the excellent value of this vanity lamp, having purchased last year a dozen different models from big-box vendors at usually twice the price. The Tangkula Bathroom Vanity Lamp can be highly recommended for any bathroom or vanity. If I need another vanity lamp, I will buy another one immediately.

My photos don't do this product justice, so I am not posting them. It is SO important to use the correct light bulb for the type of fixture you have. Look for the LED bulbs made in the "traditional glass design" and you won't be disappointed. I bought 2 of these for my bathroom to replace the old builder-grade "Hollywood" fixtures. I didn't want any dark spots and I needed good clean light in every corner. Several buyers for these fixtures were unsatisfied with their performance as "up lights" and had to flip theirs upside down. I actually test installed the first one as a "down light" and that didn't work for me at all, it put too much light just on the sink. So in the end I was able to install them as pictured in the ad, with the globes pointed toward the ceiling, and they not only look elegant and modern but they give off more than enough light to illuminate all of my bathroom, including the tub and toilet areas. Use the right bulbs, I recommend 5000K, 40 or 60 watt equivalent, LED in the traditional "glass" design for the best performance.

My old light bathroom fixture was 17 years old. Has three lights sticking straight out of the fixture. It still worked but wanted to change to a new style fixture, so chose this one from Amazon (price was cheaper than the home depot model). This new fixture has a very elegant brushed nickel color/texture. Looks very nice.First time I ever installed a fixture, and ran into challenges. The new wall plate was an inch longer that the old plate, and the center hole was not in the same location. In addition, the wires coming out of the wall were a bit too short for the new fixture (none of this is the fault of the new wall plate). So, instead of inserting the electrical wires thru the center hole, I had to squeeze the wires thru one of the other openings (curved opening to the right of the the center hole). Next, I punched a hole in the wall for anchor they provide give you, but then noticed that the screws in the box do not fit that anchor. Totally different size. So, I had to dig the toolbox to use my own screws.After installation, it looks very nice on the wall. But the bulbs they give you are way too yellow in color (2700k), so instead, I used my own 60W equivalent 3000K LED bulbs. Much brighter/whiter color. However, I noticed that with this style of light fixture , it is not as bright as my older fixture. There is plenty of light below the shades, but less light on the sides/top of the fixture. The shade do block a lot of the light. I may eventually just remove the shades.Overall though, happy with the purchase. Will see over the next year if it rusts.BTW: Their tech support was very quick to address the incorrect screw size issue.(attached picture. old versus new wall plate, screws)

Looks nice in the bathroom above the medicine cabinet.

The quality, value, looks are all good. It's a good product. My only issue was that the mounting holes were in line with the center, as was the conduit carrying the power coming in to the junction box from the side.. I couldn't drill into that (not a good idea) so, I had to drill my own mounting holes in the mount plate higher and lower. not a big issue, but, it really would not take too much effort to provide multiple mounting options on the plate to account for a variety of mounting situations. I don't think my situation is all that uncommon.

This was perfect for my bathroom and just what I was looking for. It was easy to install as well. Love how it looks.

I love this vanity light. It's exactly what I wanted (frosted glass ovular shades attached to a curved bar, not a flat bar) for a great price. A contractor installed the lights for me, so I don't know if installation was easy or difficult, but I love the finished product.

Excelente producto