🚀 Elevate Your Projects with Unmatched Precision!
The MMOBIEL Nema 17 Stepper Motor (17HS4023) is a high-performance bipolar motor designed for precision and reliability. With a step angle of 1.8 degrees, it offers 200 steps per revolution, making it ideal for various applications, including 3D printing and robotics. Its robust construction from grade-A steel ensures durability, while the low self-inductance design enhances thermal conductivity, reducing overheating. Compatible with popular platforms like Arduino and Prusa I3, this motor is a must-have for tech enthusiasts and professionals alike.
| Voltage | 4 Volts |
| Horsepower | 13 Watts |
| Item Weight | 132 Grams |
| Material | Steel |
A**R
Works as expected
Works as expected
A**R
THE BEST IN THE GAME
Cannot top this for cost or performance. An engineering masterpiece.
P**L
Only a 500hz sweet spot.
Good little motor if you accept its limitations- really like 500hz pulse rate ( on 0.001 off 0.001 secs) works well , quiet.However, move away from that - faster pulse = no rotation at all. Slower pulse for my needs ( 0.005 on 0.005 off) 200Hz it rotates but growls loudly.. much slower pulse rate and no rotation.Probably built for a specific task and it's good at that.Ps. No good try micro steps on the DRV8825.. naff.
A**R
Nice Stepper
Nice Stepper
J**R
Used to convert my Anycubic Vyper to direct drive.
Worked great!
I**O
Does not work with Titan Extduder. Not enough torque
I bought this to drive a titan extruder for direct feed on a tronxy X5-Pro. Unfortunately the motor does not drive enough torque when connected to a tronxy X5A's ST446 board. It is light and much smaller 23mm than the stock motor that's 40mm high. Unfortunately, it doesn't work for what I wanted to use it for,I will still keep it possible for another project that needs a stepper motor since I like the 20mm height. Will come in useful for some light duty work, but to drive an extruder, it may not have enough torque to reliably move the extruder.
L**K
OK
Zakup bardzo udany
C**8
Ça tourne...
Que dire de plus... Ah si il y a un fil livré avec c'est impeccable
P**D
Bad & Wrong cable, non standard shaft length
The shaft length was longer than any “normal” pancake Nema 17 motor. Worst was the cable, which not only had a bad connection but also comes with a dupont connector on one side, unlike the images. The bad wiring caused a headache as I spent hours finding the problem. However, luckily enough, I had a dupont crimp and connector set so I could recrimp the wires and the motor now works. Albeit it is a bit hotter than I would like them to be at a 45 degree C outer temperature at peak loads, even when running at the (unusually high) rated power of 1A.Also, because of the included dupont connector on one end, I had to glue it to my 3D printers motherboard. I also had to grind down the shaft because of its unusual length.It does work, but I’d rather spend a bit extra money for a better quality and cooler motor.
Trustpilot
4 days ago
3 weeks ago