Birdgo 10 x 90mm Pigeon Post & Pad Kit - Support Posts for Bird Wire Prevention Installations on Fencing & Non-Drill Surfaces

Description

Birdgo Pigeon Bird PostsHigh quality stainless steel post and pads for pigeon ledge protection.This listing includes: 10 x 90mm Posts10 x Bird Pads (Colour varies between black and grey)Install using adhesive or screw.We recommend that the end wires are supported to a fixed bird post or split pin to counter the pull from the wire.About Birdgo Post & Wire Systems (Post Pads)Installation of a post & wire system can be a cost effective and discreet way to prevent pigeons from landing on building ledges, fences and parapets etc.Bird wire is a flexible ledge system that is designed for light and medium pressure sites only. They are not suitable for pigeons are roosting overnight or nesting. Post & wire systems do not harm pigeons. Smaller bird are still able to land unrestricted.For a basic installation on a straight masonry ledge you will require:90mm & 130mm single headed bird posts (2 rows)Bird post pads0.7mm wireStandard springsCrimpsThe initial row should be installed 20mm from the edge with additional rows centred at 65mm, a minimum of 2 rows should be installed. Posts should be spaced at a maximum distance of 1.5m.If using adhesive the are should be cleaned before application.Adhesive should be allowed to fully cure before application of the wire.A spring should be attached to every length of wire and gently tensioned and then crimped.