StripMeister E250 Electric Automatic Wire Stripping Machine – Wire Size Up To Ø3/4", Jam-Free, Motorized Wire Stripper with Variable Speed Control for Copper Wires

I ordered this and it has been such a blessing to make extra money. This stripper has made it so much easier to do it. The machine actually works great pulling the copper in and push’s it out fast. Cuts the plastic away from the copper itself. However it does not work with copper in conduit. So far I’ve had to remove the conduit by hand. But the stripper is great for everything else. FACTS: go ahead and purchase the extra BLADES when purchasing it makes it easier to get the right ones. DONT GO CHEAPER WHEN ORDERING EXTRA BLADES!! Thanks, I hope this helps!!!

I ordered the "Original Stripmeister" because I do a lot of electrical work and repairs. I have barrels of wire sitting in my shop waiting to be recycled. My local recycle center gives you 50% more for stripped wire over the coated stuff. After trying the original tool out, I found it to be a bit slower and awkward to use. Feeding the wire and running the drill just wasn't what I wanted to do with this much wire to strip. So I stepped up and bought the E250, this was only one week later. Yeah, that was the right choice. I pulled it out of the box, set in on the table, plugged it in, followed the adjustment instructions and fired away. I was stripping wire in less than 15 minutes. Once you set the depth, test your cut, adjust the feed speed, just let it run and feed it wire. I didn't turn the machine off until I ran out of space on the back side of my table from the mountain of wire piling up. It does not remove the coating for you, so you will still have to do that. Once you get in the groove, it goes really fast. If you do the same type of work as I do, you will want this machine. Yes, it is a little pricey, but your time is worth something, and this will save you in the long run. My small original machine now stays in my truck, I strip wire while I'm on lunch break, so I now get paid to eat. I hope this was helpful.

I would not have attempted to strip some of the wire by hand that I did. It stripped romex, knob & tubing & 16awg stranded. Now granted, you still have to peel the insulation off, & thin stranded gets tricky, but was able to strip $400 worth in about 1.5 hours. If I were to do it by hand I would have had to straighten it all out before even attempting to strip. No regrets!

This stripper is well worth the money! I have no problems with it. Just take the time to set up each gauge of wire you are going to strip and it will serve you well!

I've run the original (drill powered) for 2-3 years now. I should've just pony'd up for this motor version then. I had a rule of thumb not to strip down #10 or smaller...I missed out on miles of bare bright!!!!! I can't stress the value of running the motor & having both hands to process the backside. As an electrician, this is just the icing I needed to really justify the real estate the bins take up. This machine has made it super fun to make $10hr 😄

Works pretty good just need to watch as you’re feeding certain sizes of wire and kind of “steer” it so it stays on the blade.

This stripper was very well designed by people who obviously were tired of the same problems people have. I am a second generation Junker. My son will be the third. We all hold full time jobs and my father myself and my son enjoy junking to make extra money and sometimes make more than you do at your regular job. This machine was money well spent. My father cannot move the heavy tons of material it takes to make good money junking anymore. He has always loved his precious metals and enjoys now just sitting in a chair and stripping wire with this machine. If you r thinking about going with a cheaper model save your money till you can afford this. The only thing we did to change this machine was add a electric on off foot pedal switch. That’s it. Cannot wait to buy a larger model for the big stuff thanks again stripmeister for building the e250

Im glad I got the electric one. Its expensive but it paid for itself on the first scrap run

Came the day after ordering! Easy to set up and easy to use.

Extrat

arrived faster than expected. Well built super quiet simple to use. Using it for household and automotive wire so far very impressed

Excellent machine works perfect wish I bought one years ago

Nice machine +++++