Threshold Ramps for Doorways Self-Adhesive Rubber Ramps for Door Threshold Rubber Door Threshold Ramp for Wheelchair for Doorways, Curb, Power Scooters, Bathroom (Black, 3/8'' Rise-3.3Ft Long)

Great solution to threshold problems. My mother needed a ramp to maneuver into her bathroom on her wheelchair. This one fit the bill. I was able to measure, cut, and stick this ramp to serve her needs.

First of all this product is awesome. Make sure you have the right measurements or else you will need to modify it to work. Just like any doorway ramp. But the material is so easy to work with but stays strong. I only have to cut 1.5 inches of length and then 1 inch of width to fit my doorway. I don't see anyone getting a perfect fit without cutting. However, this is meant to be cut to fit different entrances. I wish it was longer so I had more material to use on other doorways, but at least I know what to buy for the future.

I selected this item as both our front and back doors has some issues related to the tile installed almost 20 years ago. Added some grout to the areas where it had disintegrated and/or broken. Once that was cured, I cut this product to length and installed it at the threshold.Once it is cut and installed, it looks pretty good. It’s pretty easy to install; however, there are some considerations: cutting the product straight - be sure you have a sharp tool for cutting, measure the length needed, but this is not very forgiving. On our back door, I thought I had measured properly, but both ends refused to stay tacked down via the adhesive. Once I trimmed both ends, it worked better but by then the adhesive was worn. I added a bit of flexitape and put some weights on each end. After a day of weight, the backdoor threshold worked. Unfortunately I don’t have any pictures of the backdoor, but I took a picture of the front door - both look like that now.One other consideration - once you take the red strip off the back, the adhesive will catch everything it comes close to! Be prepared and perhaps have a second person to slowly pull the red strip as you insure the threshold is installed as you intend.Lastly, because this product comes curled up, it doesn’t sit flat initially. After I measured the threshold and cut the lengths (I was able to get 2 out of the amount I received), I laid them out and put weight on both ends to make the product flat for installation.

Exactly as described and adhesive is super strong so I know it won't budge.

Partner uses a walker and has trouble with door sill to bathroom. I measured the door width and cut to size. The adhesive made installation easy and it hasn't moved after a month of use.

Very good quality and a great purchase.

I needed something to help keep water from coming in my shed under the doors so I got this. It's easy to cut to fit and the rise isn't so much that it creates a difficult lip for getting my mower out. I do have a 1/2" thick plywood transition on the backside to help keep the transition minimal. The slope is perfect and while my doors clear the threshold, it does its job keeping water out of my shed. Cut to fit, easy to install, and durable for now.

My garage walk through door has a decent sized gap underneath it and because the fall of the slab towards the front, the door shoe can’t be flush to the ground because the door won’t open all the way. Cutting the door and adding a threshold wasn’t a good solution because the door is metal and I don’t want a high metal threshold there.This worked perfect installed right up to the door. It sealed off the gap at the bottom of the door. It’s not so high or rigid that you can’t roll things out the door and it blocks off the gap keeping rodents or snakes out