Clamp On Keyboard Tray Under Desk Storage - Ergonomic Desk Drawer Computer Keyboard Stand Under Desk Drawer - Under Desk Keyboard Tray Desk Extender - Office Keyboard Drawer Keyboard Stand for Desk

The Defy Desk is a great addition for those who has a table or desk without a keyboard tray and wants the sturdiness and high quality from a product. For my case, I use it for a counter and have a height adjustable workbench chair. The product has a strong heavy quality feel to it. The assembly is pretty easy with the provided tool. The black finish does not hide the fact that the tray is made of a sturdy wood because you can feel the texture and solidness. The key quality I love is that moving the tray forward or backward has a strong enough friction to slide it without having to worry that it'll slide during use. It does not budge after sliding it to the desired position. The width of the tray is enough for a 15" wide keyboard w/ keypad and a mouse (although the picture shown in Amazon gives the perception that there is more space - showing an 11" wide Apple keyboard and two small devices in each side). However, I am able move my keyboard to the back of the tray to write on a small notepad or post-it. Lastly, there are other products that enticed me due to the ability to adjust the angle of the tray, but I believe that will contribute to being less sturdy. The Defy Desk is SIMPLY STURDY and WELL BUILT that I won't hesitate buying another one so I don't need to move it around (so far, I have no intention to unmount and mount it elsewhere, but it's a nice feature to have, especially if I ever want to do so). And it tucks away when sliding the entire tray under my counter. The clamps that holds the tray on the table does take a very little table space away, but it does not bother me at all. Oh, and I want to mention that I support and love quality products made by a family-owned small business. Way to go for making a product worth treasuring and making working-from-home much more productive and comfortable!

It's hard to navigate the choices around keyboard trays. Some are designed for standing desks and hang 6"+ below the desk which wouldn't work for sitting. This one is great. People complain about the installation instructions but I didn't find them all that confusing. It took about 15 minutes to install it and I needed a Phillips screwdriver and the included Allen wrench. The clamps take up 2.75" square on each side of the desk. The top/shelf of the keyboard tray is 2.75" below the bottom of the desk. Sitting at a 28" high desk, I have 3" of room between my legs and the bottom of the tray. Your distance may vary. Pros: —— Sturdy – It feels like it's not going anywhere. No shake, no worries about it coming loose. Sleek – I like the all-black design. It has a matte finish so it's not shiny. Large – I can easily fit my wireless (Apple Magic) keyboard and wireless mouse and still have about 4" on each side. Textured surface – my keyboard doesn't slide around. I can use the mouse without a mouse pad just fine. Cons: —— Limited features – It doesn't tilt, raise or lower. I didn't expect it to but it's a very basic keyboard tray. Stiff – the tray slides in and out but it's not smooth. You have to apply some pressure to move it. I guess that's good since it doesn't move on it's own or from a light/accidental touch.

I saw someone praising this "Defy Desk" brand in a review of one of the multitudes of knock-off products (you know—the ones where they steal photos from a real brand). After locating this American-made family-run business, I read every single review, analyzed the photos, and noted the various complaints—even those found within the 4-star reviews. The CHIEF COMPLAINT that I was seeing (repeatedly) was the shortage of vertical space between the tray and the underside of the table-for the keyboard, mouse, and your hands. The reviews also mentioned two small, what I consider "nuisance" complaints: 1) The "backstop" not going all the way across the back of the tray (so the mouse pushes back and falls off the tray) 2) The tray rolling back in while typing I figured I could find ways to remedy those minor issues. What I was looking for was a STURDY, quality build, a tray that doesn't "bounce" while you type. I did some measuring, and took the $79.99 chance. When it arrived, I was immediately impressed at how well it was packaged in the manufacturer's box. And it was heavy! I carefully removed the parts and was relieved to find a very thick SOLID PLASTIC tray: ¾" thick! (It is NOT particle board/MDF as some recent fake negative reviews state.) >> PROS It's very sturdy, definitely won't "bounce" or shake when typing. Metal roller bearings in the metal slider tracks for a smooth glide. Hefty machined aluminum powder-coated "elbow" brackets that clamp solidly to your table top. Fitted machine screws that lock into embedded sockets on the underside of the tray. (It's not possible to "over" tighten those screws unless you are simply a brute. Once they are "locked" in, they are NOT going to loosen and fall out, even in an earthquake.) It has a slightly "pebbled" surface to keep your keyboard from skating around. Note: It is 32" wide from one clamp's edge to the opposite clamp on the table top. It's WIDE! ASSEMBLY It's fairly simple to put together, but they really should hire a good tech writer to redesign the assembly sheet. The exploded diagrams may confuse the spatially challenged. :) Hint: look at the final few images first to visualize the end result. They also provide a link to a YouTube video on the printed instruction sheet, or search "Defy Desk Keyboard Installation" to find the company's official video. Take your time, and you'll only need to do it once. (You DO have your own ratchet screwdriver with Allen bits, yes? I always toss those right-angle Allen "wrenches" that come with these types of "furniture" products.) The key to good assembly: Don't over tighten screws. DO clamp tightly to the actual table. NOTE: If one clamp is too loose, it can cause the whole unit to be skewed at an angle (on the horizontal plane) which will in turn cause one side or the other of the tracks to jam up. If you're having that issue, check both clamps on the table and be sure they are tightened evenly. (It also helps to have a level desk.) It took me about 40 minutes to get it all carefully assembled and mounted. >> CONS (only one, but it requires a modification!) I placed my keyboard and mouse on the tray… and immediately got that sinking feeling you get when you know it's not going to work. Why? Because there was only about ¼" clearance from the top of my input devices and the underside of the table. (Total 2¾" clearance.) I don't have a high-profile keyboard, but my trackball is tall. My knuckles were hitting the table, and I could not fit my hands over the keys with the tray pushed in, definitely not able to work the trackball with the tray even partially pushed in—barely cleared! Not only that, but now my elbows were at a 45° angle reaching UP to the keyboard, instead of the 90° angle needed for PROPER ERGONOMICS—which is the whole POINT of having a keyboard tray! THE TRAY NEEDS TO BE LOWER. This could be very easily remedied if "Part G"—the elbow portion of the clamp, were just 1½" longer. I really wanted this unit to work out, especially because it was built so very, VERY well. So I reached out to the company, praising the quality of their product, explaining the issue stated above, and requesting to order longer parts or "extensions" to lower the tray. Four days and no response, reached out again and got a reply: "Thank you for your email. I have passed this along to our manufacturing team but unfortunately, this requires new tooling which will take many months. We completely understand if you need to return it. In the meantime, we will be working on improving our keyboard tray." Well, I still did not want to return this tray. I am persistent! >> THE RESOLUTION I mentioned my dilemma to a handyman-type friend and he said "Bring that part to a good MACHINE SHOP and have them FABRICATE NEW PARTS at the size you need. It shouldn't cost very much." That's exactly what I did. (See PHOTOS.) Cost me $45 for the new pair of bracket "elbows" (replacing "Part G") that are 1½" longer than the original parts, and now the tray sits at exactly the height I need for perfect ergonomics—with no more knuckle-banging! I wish I could contact all the other reviewers who had this same issue and tell them about this easy solution. Hopefully this review will help inform future potential buyers. And maybe this review will even ALERT THE MANUFACTURER to this simple solution. >>The other two "NUISANCE" issues were REMEDIED by: 1) Attaching a firm strip of board at the backstop on the mouse side, to prevent the mouse from flying off the back of the tray 2) Attaching a very large binder clip to one side of the tracks (see PHOTO) after I pull the tray out-to keep it from rolling back in while typing. FINAL THOUGHTS: I think this is still the very best keyboard tray available on the market today. The fit & finish is superb. It's hefty & sturdy, and I expect it to last a very, very long time. Total cost with the trips to the machine shop for extra parts was higher than planned, but I'm OK with that. I've been using this "Defy Desk" keyboard tray every day for 4 months now, and I would still recommend this product—if you don't mind getting parts fabricated to make the ergonomics work. (What I'm NOT ok with is that you can't get the one-year WARRANTY unless you write a review on Amazon. That should NOT be a requirement to obtain a warranty. And I've probably even voided the warranty anyway, by changing out parts.)

I got this keyboard tray because every desk I could find is too tall relative to my height for me to achieve proper ergonomics i.e. 90 degrees at the elbows and knees. This product allows me to have keyboard about 3.5" below the top of the desk (standard 28" high desk) which is perfect for me. I'm 5'9" with very average proportions and I like my chair all the way down to have 90 degrees at my knees. I was concerned that this product may have wobble or some kind of issue like that, but I am pleased to report that it is very sturdy. It is made of heavy duty materials and has considerable weight. The tray sliding action is smooth but not so smooth that it wants to slide away from you during use. It's the perfect amount of grit and stability on the track. Assembly was very easy and actually kind of satisfying. Attaching it to the desk couldn't be simpler. You just turn the bolts and clamp it on. The clamps are low profile and don't take up too much desk room. In summary this product exceeded my expectations and is well worth the asking price if you are looking to improve your ergonomics and free up desk space.

I recently bought a racing wheel and needed a way to get my keyboard off of my desk. After looking at lots of options, I found this Defy unit, and immediately saw the reviews mentioning the high quality. I was really hesitant based on the price, which is so high I'd hope a whole desk came with it, but I decided to go for it anyways as I'll always pay for quality. In full transparency, I got an Amazon Warehouse used model and saved a solid $25. The box was trashed, but everything came included and looks brand new. The Warehouse stuff is always a gamble, but in this case it paid off. For $60 after tax, I am so happy with my decision! First of all, this thing is built like a TANK! The rails are solid steel and slide like butter. The platform is made out of some synthetic material, but is super sturdy and solid, it does not flex or bend at all. The clamps are insane, they could probably support my weight, let alone this keyboard tray. Super well built and over-engineered, way better than any built-in keyboard tray I've ever seen included even with high end desks. If you currently have a keyboard tray that came with your desk, throw it out and get the Defy! Install was super easy. They include thick rubber rings and pads that provide soft contact points on both ends of the brackets. I had zero concern about damaging my desk. The instructions were very clear and super easy to follow. It comes with an Allan key, but you'll need a Phillips head screwdriver. Once I put it together, it took 5 seconds to mount, super easy and will be easy to move in the future if needed. Overall, while this unit is very expensive, it's worth the money and you won't find something more quality than this. Spare no expense, and get the tray that will outlive the desk it's attached to. If I ever need another, I won't hesitate to buy this again. Just buy it!

I bought this a few years ago. I decided to come back and write a review after seeing how long this keyboard tray would last. I've had it for 4 years now and I use it almost every day (working from home). I've slid it in and out probably thousands of times and it still rolls smoothly. It clamps on very well and doesn't shake or wobble. It adds plenty of space and I keep both my keyboard and my mouse on it. The clamps have never needed any adjusting since I installed the tray. I even bought a second one for my wife's desk. The only complaint I might have had was easy to fix: The tray slides in and out so easily that sometimes it might want to slide in while I'm using it. I just got one of those cheap office binder clips and I clip that on to the right-hand side where the ball-bearings are when I'm using the keyboard tray. That completely eliminates and movement of the tray while in use. To close, just pull the clip off. I leave the clip sitting on top of the try next to my mouse and just clip it back on the next time I use the tray. This may only be necessary because my desk is very slightly un-level. This exact same tray on my wife's desk doesn't need to use the clip trick. The surface of the tray has just enough texture to hold the keyboard and mouse in place so that they don't slide around when you open/close the tray.

Awesome keyboard tray. We did a lot of research, and most of the trays out there unfortunately would not work with our table, which is thicker than most. Not only does this tray work with thicker tables/desks, but this one is much sturdier and more robust than the options we were originally considering. This tray is built to last. The tray slides effortlessly, and is plenty large to accommodate our oversized keyboard and mouse. Best of all, prior to receiving this my wife was suffering from a painful right shoulder because ever since she was forced to work from home due to COVID, she was using her keyboard on top of the table, and it was straining her shoulder for hours on end each day. Now, with this tray, her posture and arms are ergonomically correct, and the pain she once had is quickly diminishing. Lastly, a few people commented that this tray was difficult to assemble. My experience is the directions provided were very straightforward, and it only took me about 10 minutes to assemble. We would highly recommend this keyboard tray to anyone looking for a high quality, well built tray that is built to last.

What attracted me to the keyboard tray was the solidly-built look combined with the good reviews. It absolutely is a very solid product. The tray is very sturdy and all of the components except the actual tray are metal. It pulls out and pushes in fairly easily and stays in place very well. It was a little bit tricky to build based on the pictures, but it did not take too long. I feel like I could drive a tractor on this and it would not hurt it! As I was looking for something simply to remove me a little further from my monitors on my 24 inch deep desk, this will works and I feel like it will last for a very long time. I wouldn't have minded if it was little less wide, but the depth is perfect for my ergonomic mouse and keyboard. I love the fact that it is removable if needed elsewhere. I also like that it pushes in completely, which I was a little concerned about as my sit-stand desk has bars underneath it. But thankfully, this keyboard sits below the bars! This was a great investment. I cannot imagine anyone being disappointed in this product!

I bought this product because my desk was too high and narrow, so this really helped in keeping my arms at a good typing height, and myself a good distance away from a relatively big monitor. Build quality is excellent so far, I've caught myself leaning on it a few times without causing any movement. It's a perfect width for my Apple wide keyboard and mouse, so no issues there. The tray's clamping system comes with padding to avoid damaging your desk. I'm stoked.

I've used this for over a month, really happy that my neck and shoulder issues no longer appear. So far, I've found this to be: - Sturdy and well built tray. Really glad that I don't have the hassle of drilling holes. - Assembly was manageable, better instructions would have made it more straightforward. That being said, I doubt you could make a major mistake putting this together (I made a couple with the orientation, but was able to fix them easily).

Easy to assemble and sturdy. Creates a lot of space.

I really love this keyboard tray, it s wide enough for a mouse pad on the side, and a roller mouse and keyboard

Loving this keyboard tray. Have been using it for three months now. It is so good that I purchased another one (a different brand, similar price) for my other computer but found out that this brand is the best!